Neues Plugin: Smartmeter - Stromzähler auslesen

Einklappen
X
Einklappen
 
  • Seite von 50
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
Vorherige 1 39 46 47 48 49 50 template Weiter
  • loxforum
    Smart Home'r
    • 08.10.2021
    • 59
    #721
    Zitat von snehvid

    Mein Loxberry liegt leider nicht in dem gleichen Raum, wo auch der Zählerschrank ist. D.h. wenn ich jetzt auf diese Variante gehen müsste (weil OEM Loxone Zähler nicht funktioniert), dann brauche ich einen zweiten Loxberry? Oder wie löse ich es am besten?

    LG
    Ich habe folgendes für das Auslesen vom Smartmeter im Keller in Verwendung: https://www.german-metering.de/auslesekopf-op-400 am Loxberry hängt ein RS485-USB Adapter, in den Keller geht ein CAT6Kabel, davon zwei Litzen 24V/GND und zwei Litzen RS485+/-. Sind 3 Stockwerke dazwischen, also Distanz ist kein Problem, WLAN ginge hier nicht und ich brauch keinen Stromanschluss beim Stromzähler.
    Zuletzt geändert von loxforum; 27.12.2023, 14:25.

      Kommentar

      • snehvid
        Extension Master
        • 24.03.2022
        • 123
        #722
        Super Hinweise, danke Euch. Ich habe ausreichenden WLAN-Empfang im Technikraum und auch eine Steckdose im Schaltschrank, sodass ich mich für zwei Module auf Basis Tasmota entschieden haben, welche über USB-C mit Strom versorgt werden. Keine Bastelarbeit notwendig, aber mit 50 Euro pro Lesekopf hat das natürlich auch seinen Preis. ich werde berichten.

        MQTT oder HTTP? Ist das egal oder sollte man auf lieber ein Protokoll bevorzugen? Native Integration in Loxone ist mehr wichtig, ungern Umwege über Loxberry, wenn anders möglich,

          Kommentar

          • Noschvie
            LoxBus Spammer
            • 24.09.2018
            • 484
            #723
            Welches Modul hast du gewählt, eines mit einem ESP32? MQTT ist gegenüber http zu bevorzugen, da ressourcenschonender.

              Kommentar

              • snehvid
                Extension Master
                • 24.03.2022
                • 123
                #724
                Den habe ich bestellt:

                Amazon.de
                https://www.amazon.de/bitShake-SmartMeterReader-TASMOTA-vorinstalliert-Lesekopf/dp/B0CCMXSPVX/


                Ich werde erst einmal HTTP testen, bevor ich auf MQTT gehe - ich möchte einfach bei solchen Basis-Anbindungen kein Loxberry dazwischen haben. Wenn die Sonos-Steuerung ausfällt oder der Staubsaugroboter, ist es vertretbar. Beim Last- bzw. Energiemanagement weniger.

                LG
                Zuletzt geändert von snehvid; 28.12.2023, 14:46.

                  Kommentar

                  • Prof.Mobilux
                    #724.1
                    Prof.Mobilux kommentierte
                    28.12.2023, 16:12
                    Kommentar bearbeiten
                    Dann möchtest Du aber auch keine ESP32 Lösung für Dein Lastmanagement, die Deinen Zähler per IR Schnittstelle auslesen muss... Für ein echtes ESS ist das zu langsam, egal ob per MQTT oder (noch schlimmer) HTTP.
                    • snehvid
                      #724.2
                      snehvid kommentierte
                      28.12.2023, 19:34
                      Kommentar bearbeiten
                      Sondern?
                      • Prof.Mobilux
                        #724.3
                        Prof.Mobilux kommentierte
                        29.12.2023, 10:23
                        Kommentar bearbeiten
                        Gridzähler per RS485 oder Modbus.
                      • loxforum
                        Smart Home'r
                        • 08.10.2021
                        • 59
                        #725
                        Zitat von snehvid
                        MQTT oder HTTP? Ist das egal oder sollte man auf lieber ein Protokoll bevorzugen?
                        Da eh schon ein Loxberry in Verwendung ist, definitiv MQTT, ich habe bei mir mittlerweile alles auf MQTT umgestellt, da dies einfach viel zuverlässiger funktioniert. Bei mir kommen die Werte von Smartmeter auch im Sekundentakt, also nicht wirklich ideal für ein kontinuierliches HTTP Request. Noch ein Vorteil von MQTT: Mit dem LWT kann man den Miniserver automatisch informieren, wenn das Gerät offline geht. Also wenn möglich, dann unbedingt MQTT verwenden. HTTP verwende ich mittlerweile nur noch zum Scrapen vom lokalen "Badewetter".

                          Kommentar

                          • LoxMunich
                            Extension Master
                            • 29.12.2016
                            • 161
                            #726
                            Ich bräuchte bitte auch hier noch mal eure Hilfe: Seit kurzem habe ich einen neuen Zähler Landis+Gyr E220

                            Mit einer starken LED-Taschenlampe habe ich die PIN eingegeben und den Zähler vorbereitet:
                            • mit Taschenlampe von links nach rechts über die beiden IR-Punkte fahren (recht zügig); im Display steht links unten PIN
                            • Bei der PIN-Eingabe wird der Wert jeweils durch einen kurzen Lichtimpuls (mit Taschenlampe zügig von links nach rechts und in einem Schwung zurück) um eine Ziffer erhöht geändert. Sobald der gewünschte Wert erreicht ist, warten und nach kurzer Zeit springt der Curser auf die nächste Stelle. Wenn man dann die komplette PIN eingegeben hat:
                            • im Menü blättert man durch einen kurzen Lichtimpuls durch die verschiedenen Punkte. Es dauert ca. 10 Menüeinträge bis man auf den Punkt INFO kommt. Diesen durch einen langen Impuls (Taschenlampe ca. 5 Sekunden auf die IR-Schnittstelle halten) auf ON gesetzt
                            • dann weiter im Menü zum nächsten Punkt ("PIN") und durch einen langen Lichtimpuls auf OFF stellen
                            ​

                            Im Handbuch steht etwas von " [...] SML gepusht" und Kommunikationsparameter: Der Kommunikationskanal hat folgende Parameter: • Bitrate 9600 Baud • Code 8-N-1


                            Da der E220 nicht explizit aufgeführt ist, habe ich "Manuelle Konfiguration". gewählt; aber was genau gebe ich bei

                            Protokoll:
                            Max. Baudrate:
                            Initiale Baudrate:
                            Parity:
                            Handshake:
                            Databits:
                            Stopbits:
                            Timeout:
                            Verzögerung:
                            CRC:​

                            ein?

                            Ist richtig:

                            Protokoll: Generic SML-Protocoll
                            Max. Baudrate: 9600
                            Initiale Baudrate: 9600
                            Parity: None
                            Handshake: None
                            Databits: 8
                            Stopbits: 1
                            Timeout: 120
                            Verzögerung: 2
                            CRC:​ CRC16_X_25​



                            Ich bekomme dann aber nur zurück:

                            Code:
                            All data written to /var/run/shm/smartmeter/0047.xxxx
0047: UDP String to send: 0047:Last_Update:2023-12-29 22:38:41; 0047:Last_UpdateLoxEpoche:473121521;
0047:Consumption_Total_OBIS_1.8.0:1082.311;
0047:Consumption_CalculatedPower_OBIS_1.99.0:0.0000;
0047:Delivery_Total_OBIS_2.8.0:2759.5848;
0047:Delivery_CalculatedPower_OBIS_2.99.0:0.0000;
0047:Total_Power_OBIS_16.7.0:0.603;
0047: Send Data to Miniserver at 192.168.xxx.xxx.
0047: Send OK to Miniserver. IP:192.168.xxx.xxx Port:7005​
                            ​
                            Zuletzt geändert von LoxMunich; 29.12.2023, 22:42.

                              Kommentar

                              • Sebastian
                                LoxBus Spammer
                                • 28.08.2015
                                • 243
                                #727
                                Zitat von LoxMunich
                                Ich bräuchte bitte auch hier noch mal eure Hilfe
                                ​
                                Hi,

                                ich habe zwar nicht deinen Zähler, aber auch 8-N-1.
                                Hier meine Config:

                                Klicke auf die Grafik für eine vergrößerte Ansicht Name: image.png Ansichten: 0 Größe: 53,7 KB ID: 416659 ​
                                Angehängte Dateien

                                  Kommentar

                                  • loxfused
                                    Dumb Home'r
                                    • 07.10.2015
                                    • 23
                                    #728
                                    blacksun
                                    Hi und Danke schon mal.
                                    Hier der Dump zu # 689.2
                                    Angehängte Dateien
                                    Zuletzt geändert von loxfused; 22.01.2024, 16:10.

                                      Kommentar

                                      • haegar2910
                                        Azubi
                                        • 03.10.2015
                                        • 8
                                        #729
                                        Guten Abend ich verstehe mal wieder nicht warum ich die Werte nicht empfange. Ich habe das Plugin meiner Meinung nach richtig konfiguriert.

                                        Wenn ich die Seite im Plugin aufrufe erhalte ich folgendes:
                                        Klicke auf die Grafik für eine vergrößerte Ansicht Name: grafik.png Ansichten: 416 Größe: 10,4 KB ID: 420178
                                        Im UDP Monitor:

                                        Klicke auf die Grafik für eine vergrößerte Ansicht Name: grafik.png Ansichten: 398 Größe: 6,9 KB ID: 420179​

                                        Konfig:
                                        Klicke auf die Grafik für eine vergrößerte Ansicht Name: grafik.png Ansichten: 451 Größe: 7,5 KB ID: 420180​
                                        Klicke auf die Grafik für eine vergrößerte Ansicht Name: grafik.png Ansichten: 397 Größe: 46,3 KB ID: 420181​
                                        Was mache ich falsch, bzw. wo liegt mein Denkfehler?

                                          Kommentar

                                          • Prof.Mobilux
                                            #729.1
                                            Prof.Mobilux kommentierte
                                            23.01.2024, 22:40
                                            Kommentar bearbeiten
                                            Slash am Anfang korrekt?
                                            • haegar2910
                                              #729.2
                                              haegar2910 kommentierte
                                              24.01.2024, 09:55
                                              Kommentar bearbeiten
                                              Habe gestern abend entnervt aufgegeben, man muss einsehen wenn es nichts mehr wird.
                                              Heute morgen frisch ans Werk, den ersten Kommentar gelesen, nochmal alles kontrolliert, es fehlte ein kleines i hinter dem Slash.
                                              Verflucht soviele Stunden sinnlos getestet und probiert.
                                            • pere
                                              Azubi
                                              • 07.07.2022
                                              • 5
                                              #730
                                              Zitat von Joh S.

                                              Hi JensGeen ,
                                              ich bin in den letzten beiden Tagen damit zugange gewesen, exakt gleiche Geschichte (Wechsel von Iskra (MT 681) auf ZPA.)

                                              Versuch es mal wie im Anhang, Bestätigung wäre super. So ging es bei mir. Später kann ich sonst dazu nochmal Infos ergänzen, bin grad aufn Sprung.
                                              Ich habe auch einen ZPA GH305 statt dem Iskra bekommen.

                                              Vielen Dank für die Infos, das hat mich ein ganzes Stück weitergebracht. Aber das geht nur, wenn ich den erweiterten Datensatz deaktiviere.
                                              Ansonsten kommt ein Fehler beim Auslesen und er kann die Daten nicht auswerten.

                                              Welche Erfahrungen hast du hier gemacht? Wäre nicht dramatisch, dadurch fehlt mir eigentlich nur die aktuelle Leistung,...

                                              Viele Grüße
                                              Peter

                                                Kommentar

                                                • Joh S.
                                                  Smart Home'r
                                                  • 27.10.2016
                                                  • 99
                                                  #731
                                                  Zitat von pere

                                                  Ich habe auch einen ZPA GH305 statt dem Iskra bekommen.

                                                  Vielen Dank für die Infos, das hat mich ein ganzes Stück weitergebracht. Aber das geht nur, wenn ich den erweiterten Datensatz deaktiviere.
                                                  Ansonsten kommt ein Fehler beim Auslesen und er kann die Daten nicht auswerten.

                                                  Welche Erfahrungen hast du hier gemacht? Wäre nicht dramatisch, dadurch fehlt mir eigentlich nur die aktuelle Leistung,...

                                                  Viele Grüße
                                                  Peter
                                                  Danke fürs Feedback; gut zu wissen, dass die Parameter passen!
                                                  Meiner Meinung nach sind gerade die Daten aus dem erweiterten Datensatz interessant.
                                                  Mit den absoluten Zählerständen kannst du ja nichts anfangen aber aktuelle Leistung bzw. aktuelle Einspeisung ist wichtig - darüber regelt man ja letzten Endes etwas.
                                                  Den absoluten Stand auszulesen fällt mir aktuell kein wirklicher smarter Mehrwert zu ein....
                                                  Es kostet ja nur ein Anruf und du erhältst den Code um den Zähler freizuschalten. ;-)

                                                    Kommentar

                                                    • pere
                                                      #731.1
                                                      pere kommentierte
                                                      13.02.2024, 21:56
                                                      Kommentar bearbeiten
                                                      Ich habe ja den Code, aber wenn man den erweiterten Datensatz sich anzeigen lässt, dann klappt das auslesen nicht mehr.
                                                      Deaktivieren ich den, dann geht das wieder.

                                                      https://www.rng.de/bedienungsanleitung-zpa-gh-305-v_1_1.pdfx


                                                      In Kapitel 5.1 wird das mit dem erweiterten Datensatz beschrieben.

                                                      Hast du eine Idee woran das liegen könnte?
                                                    • Joh S.
                                                      Smart Home'r
                                                      • 27.10.2016
                                                      • 99
                                                      #732
                                                      pere Ah ok dann habe ich es falsch verstanden.
                                                      Ok das ist seltsam.. Wo kommt denn die Fehlermeldung bzw. welche genau?

                                                      Das hier bekommst du im Plugin aber angezeigt?
                                                      Code:
                                                      01304DE3:Last_Update:2024-02-15 12:22:20
01304DE3:Last_UpdateLoxEpoche:477231740
01304DE3:Consumption_Total_OBIS_1.8.0:1673.2118
01304DE3:Consumption_CalculatedPower_OBIS_1.99.0:1 .0286
01304DE3:Consumption_Power_L1_OBIS_36.7.0:0.207
01304DE3:Consumption_Power_L2_OBIS_56.7.0:0.207
01304DE3:Consumption_Power_L3_OBIS_76.7.0:0.324
01304DE3:Delivery_Total_OBIS_2.8.0:669.2733
01304DE3:Delivery_CalculatedPower_OBIS_2.99.0:0.0000
01304DE3:Total_Power_OBIS_16.7.0:0.739
#EOF​

                                                        Kommentar

                                                        • pere
                                                          Azubi
                                                          • 07.07.2022
                                                          • 5
                                                          #733
                                                          [QUOTE=Joh S.;n423165]pere Ah ok dann habe ich es falsch verstanden.
                                                          Ok das ist seltsam.. Wo kommt denn die Fehlermeldung bzw. welche genau?

                                                          Mit dem aktivierten erweiterten Datensatz sieht es so aus

                                                          Code:
                                                          DK0EJFVF: Found configuration for DK0EJFVF
DK0EJFVF: Manual settings.
DK0EJFVF: Protocol: iskra691sml
DK0EJFVF: Timeout: 5
DK0EJFVF: Delay: 1
DK0EJFVF: CRC: CRC16_X_25
DK0EJFVF: Device: /dev/serial/smartmeter/DK0EJFVF
DK0EJFVF: Baudrate:9600/9600 Databits:8 Stopbits:1 Parity:none Handshake:none
Initial Baudrate: 9600
Max Baudrate: 9600
Protocol: iskra691sml
Timeout: 5
Delay: 1
CRC: CRC16_X_25
Setting up port /dev/serial/smartmeter/DK0EJFVF: Baudrate:9600/9600 Databits:8 Stopbits:1 Parity:none Handshake:none
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
Save raw buffer to /var/run/shm/smartmeter/DK0EJFVF.dump
Parse /var/run/shm/smartmeter/DK0EJFVF.dump as SML-Protocol.
Buffer:
656 bytes skipped at begining!
ERROR: '00' expected, got '0100480700FF0101622352FE690000000000005BD301770701...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(498): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#3 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#4 {main}
502 bytes skipped in between!
ERROR: '00' expected, got '0100480700FF0101622352FE690000000000005BD301770701...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(498): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#3 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#4 {main}
502 bytes skipped in between!
ERROR: '00' expected, got '0100480700FF0101622352FE690000000000005BD301770701...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(498): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#3 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#4 {main}
502 bytes skipped in between!
ERROR: '00' expected, got '0100480700FF0101622352FE690000000000005BCD01770701...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(498): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#3 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#4 {main}
502 bytes skipped in between!
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(287): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(305): SML_PARSER->readInteger()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(362): SML_PARSER->readInteger8()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#8 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#9 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#10 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(365): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: '77' expected, got '...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(356): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(357): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(358): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(360): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(283): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(305): SML_PARSER->readInteger()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(362): SML_PARSER->readInteger8()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#8 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#9 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#10 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(365): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: '77' expected, got '...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(356): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(357): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(358): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(360): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(283): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(305): SML_PARSER->readInteger()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(362): SML_PARSER->readInteger8()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#8 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#9 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#10 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(365): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: '77' expected, got '...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(356): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(357): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(358): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(360): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(283): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(305): SML_PARSER->readInteger()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(362): SML_PARSER->readInteger8()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#8 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#9 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#10 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(365): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: '77' expected, got '...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(356): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(357): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(358): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(360): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(283): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(305): SML_PARSER->readInteger()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(362): SML_PARSER->readInteger8()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#8 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#9 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#10 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(365): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: '77' expected, got '...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(356): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(357): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(358): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(360): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(283): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(305): SML_PARSER->readInteger()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(362): SML_PARSER->readInteger8()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#8 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#9 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#10 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(365): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: '77' expected, got '...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(356): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(357): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(358): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(360): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(283): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(305): SML_PARSER->readInteger()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(362): SML_PARSER->readInteger8()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#8 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#9 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#10 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(365): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: '77' expected, got '...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(356): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(357): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(358): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(360): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(283): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(305): SML_PARSER->readInteger()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(362): SML_PARSER->readInteger8()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#8 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#9 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#10 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(365): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: '77' expected, got '...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(356): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(357): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(358): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(360): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(283): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(305): SML_PARSER->readInteger()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(362): SML_PARSER->readInteger8()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#8 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#9 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#10 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(365): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: '77' expected, got '...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(356): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(357): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(358): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(359): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(360): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(283): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(305): SML_PARSER->readInteger()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(362): SML_PARSER->readInteger8()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#8 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#9 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#10 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(364): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#7 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#8 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(365): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(415): SML_PARSER->readListEntry()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(439): SML_PARSER->readValList()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#6 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#7 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#8 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#9 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(157): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(440): SML_PARSER->parse_sml_data()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#6 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#7 {main}
ERROR: Error, unexpected type 'x' TL=  !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(440): SML_PARSER->parse_sml_data()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#5 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#6 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(272): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(441): SML_PARSER->readOctet()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(462): SML_PARSER->readListResponse()
#4 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(486): SML_PARSER->readMessageBody()
#5 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#6 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#7 {main}
ERROR: can't read enough bytes !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(294): SML_PARSER->read()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(496): SML_PARSER->readUnsigned()
#3 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#4 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#5 {main}
ERROR: '00' expected, got '...' !
#1 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(498): SML_PARSER->match()
#2 /opt/loxberry/bin/plugins/smartmeter/php_sml_parser.class.php(524): SML_PARSER->parse_sml_message()
#3 /opt/loxberry/bin/plugins/smartmeter/sml_parser.php(37): SML_PARSER->parse_sml_hexdata()
#4 {main}

Calculate average power for cons.
Last Reading: 0.000. Saved before: 0.0742 hours. Consumption: 0.0000. Avg. Power: 0.0000,
Calculate average power for del.
Last Reading: 0.000. Saved before: 0.0742 hours. Consumption: 0.0000. Avg. Power: 0.0000,
Save Meter data to /var/run/shm/smartmeter/DK0EJFVF.data.
All data written to /var/run/shm/smartmeter/DK0EJFVF.xxxx
DK0EJFVF: UDP String to send: DK0EJFVF:Last_Update:2024-03-08 20:49:35; DK0EJFVF:Last_UpdateLoxEpoche:479162975; DK0EJFVF:Consumption_CalculatedPower_OBIS_1.99.0:0.0000;​
                                                          Und wenn ich den wieder deaktiviere, sieht es so aus:

                                                          Code:
                                                          DK0EJFVF: Found configuration for DK0EJFVF
DK0EJFVF: Manual settings.
DK0EJFVF: Protocol: iskra691sml
DK0EJFVF: Timeout: 5
DK0EJFVF: Delay: 1
DK0EJFVF: CRC: CRC16_X_25
DK0EJFVF: Device: /dev/serial/smartmeter/DK0EJFVF
DK0EJFVF: Baudrate:9600/9600 Databits:8 Stopbits:1 Parity:none Handshake:none
Initial Baudrate: 9600
Max Baudrate: 9600
Protocol: iskra691sml
Timeout: 5
Delay: 1
CRC: CRC16_X_25
Setting up port /dev/serial/smartmeter/DK0EJFVF: Baudrate:9600/9600 Databits:8 Stopbits:1 Parity:none Handshake:none
00C01B1B1B1B010101017605007C99B06200620072650000010176010B0A015A5041000134835705010203040B0A015A50410001348357726201650029891601631B90007605007C99B16200620072650000070177010B0A015A50410001348357070100620AFFFF726201650029891678770701006032010101010101045A50410177070100600100FF010101010B0A015A504100013483570177070100010800FF65001C310401621E52FF6900000000005344800177070100010801FF0101621E52FF6900000000005344800177070100010802FF0101621E52FF6900000000000000000177070100020800FF0101621E52FF690000000000183094017707010000020000010101010332310177070100605A020101010101057249A01D01010163239F007605007C99B26200620072650000020171016339D00000001B1B1B1B1A0245671B1B1B1B010101017605007C99B36200620072650000010176010B0A015A5041000134835705010203040B0A015A504100013483577262016500298917016362E4007605007C99B46200620072650000070177010B0A015A50410001348357070100620AFFFF726201650029891778770701006032010101010101045A50410177070100600100FF010101010B0A015A504100013483570177070100010800FF65001C310401621E52FF6900000000005344800177070100010801FF0101621E52FF6900000000005344800177070100010802FF0101621E52FF6900000000000000000177070100020800FF0101621E52FF690000000000183094017707010000020000010101010332310177070100605A020101010101057249A01D01010163DD14007605007C99B5620062007265000002017101637AC80000001B1B1B1B1A02E95B1B1B1B1B010101017605007C99B66200620072650000010176010B0A015A5041000134835705010203040B0A015A504100013483577262016500298918016349D1007605007C99B76200620072650000070177010B0A015A50410001348357070100620AFFFF726201650029891878770701006032010101010101045A50410177070100600100FF010101010B0A015A504100013483570177070100010800FF65001C110401621E52FF6900000000005344800177070100010801FF0101621E52FF6900000000005344800177070100010802FF0101621E52FF6900000000000000000177070100020800FF0101621E52FF690000000000183094017707010000020000010101010332310177070100605A020101010101057249A01D0101016390AD007605007C99B8620062007265000002017101630BF60000001B1B1B1B1A02CA4E1B1B1B1B010101017605007C99B96200620072650000010176010B0A015A5041000134835705010203040B0A015A5041000134835772620165002989190163A51B007605007C99BA6200620072650000070177010B0A015A50410001348357070100620AFFFF726201650029891978770701006032010101010101045A50410177070100600100FF010101010B0A015A504100013483570177070100010800FF65001C310401621E52FF6900000000005344800177070100010801FF0101621E52FF6900000000005344800177070100010802FF0101621E52FF6900000000000000000177070100020800FF0101621E52FF690000000000183094017707010000020000010101010332310177070100605A020101010101057249A01D010101631C25007605007C99BB62006200726500000201710163FCF80000001B1B1B1B1A025BA21B1B1B1B010101017605007C99BC6200620072650000010176010B0A015A5041000134835705010203040B0A015A50410001348357726201650029891A01632E87007605007C99BD6200620072650000070177010B0A015A50410001348357070100620AFFFF726201650029891A78770701006032010101010101045A50410177070100600100FF010101010B0A015A504100013483570177070100010800FF65001C310401621E52FF6900000000005344800177070100010801FF0101621E52FF6900000000005344800177070100010802FF0101621E52FF6900000000000000000177070100
Save raw buffer to /var/run/shm/smartmeter/DK0EJFVF.dump
Parse /var/run/shm/smartmeter/DK0EJFVF.dump as SML-Protocol.
Buffer:
4 bytes skipped at begining!
1-0:96.50.1*255(ZPA*)
(0A015A50410001348357*)
1-0:1.8.0*255(545.7024*kWh)
1-0:1.8.1*255(545.7024*kWh)
1-0:1.8.2*255(0*kWh)
1-0:2.8.0*255(158.53*kWh)
(3231*)
(7249A01D*)

Calculate average power for cons.
Last Reading: 545.702. Saved before: 0.0344 hours. Consumption: 0.0000. Avg. Power: 0.0000,
Calculate average power for del.
Last Reading: 158.530. Saved before: 0.0344 hours. Consumption: 0.0000. Avg. Power: 0.0000,
Save Meter data to /var/run/shm/smartmeter/DK0EJFVF.data.
All data written to /var/run/shm/smartmeter/DK0EJFVF.xxxx​
                                                          ​

                                                          Woran kann das liegen? Er scheint ja Daten zu empfangen.

                                                          Vielen Dank im Voraus und viele Grüße
                                                          Peter

                                                            Kommentar

                                                            • blacksun
                                                              #733.1
                                                              blacksun kommentierte
                                                              09.03.2024, 10:28
                                                              Kommentar bearbeiten
                                                              Hallo Peter, sende mir mal die dump Datei aus Save raw buffer to /var/run/shm/smartmeter/DK0EJFVF.dump. Ich glaub, man muss die Datei umbenennen, damit man diese hier hochladen kann. Dann schau ich mir das mit dem erweitertem Datensatz an.
                                                              • pere
                                                                #733.2
                                                                pere kommentierte
                                                                10.03.2024, 11:52
                                                                Kommentar bearbeiten
                                                                Reicht dir das so?

                                                                Code:
                                                                loxberry@loxberry:~ $ cat /var/run/shm/smartmeter/DK0EJFVF.dump
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
                                                              • pere
                                                                Azubi
                                                                • 07.07.2022
                                                                • 5
                                                                #734
                                                                blacksun

                                                                Anbei noch als Datei. Vielen Dank im Voraus.
                                                                Angehängte Dateien

                                                                  Kommentar

                                                                  • blacksun
                                                                    MS Profi
                                                                    • 20.01.2016
                                                                    • 575
                                                                    #735
                                                                    Hallo Pere, installiere dir mal das aktuelle master.

                                                                    https://github.com/mschlenstedt/LoxBerry-Plugin-Smartmeter/archive/refs/heads/master.zip


                                                                    Dein Zähler gibt im erweiterten Modus 26 Werte aus. Diese werden jetzt durch das Plugin ausgelesen, allerdings nicht per UDP übertragen. Das macht keinen Sinn oder brauchst du einen Phasenwinkel :-)

                                                                      Kommentar

                                                                      Vorherige 1 39 46 47 48 49 50 template Weiter
                                                                      Lädt...

                                                                      Wir verarbeiten personenbezogene Daten über Nutzer unserer Website mithilfe von Cookies und anderen Technologien, um unsere Dienste bereitzustellen, Werbung zu personalisieren und Websiteaktivitäten zu analysieren. Wir können bestimmte Informationen über unsere Nutzer mit unseren Werbe- und Analysepartnern teilen. Weitere Einzelheiten finden Sie in unserer Datenschutzrichtlinie.

                                                                      Wenn Sie unten auf "Einverstanden" klicken, stimmen Sie unserer Datenschutzrichtlinie und unseren Datenverarbeitungs- und Cookie-Praktiken wie dort beschrieben zu. Sie erkennen außerdem an, dass dieses Forum möglicherweise außerhalb Ihres Landes gehostet wird und Sie der Erhebung, Speicherung und Verarbeitung Ihrer Daten in dem Land, in dem dieses Forum gehostet wird, zustimmen.

                                                                      Einverstanden