fertige Hardware für 433Mhz IR WIFI bridge

[Robert L.]

samt Node-RED MQTT custom firmware usw.

ziemlicher WunderWuzi für 9€

http://tinkerman.cat/hacking-sonoff-rf-bridge-433/

(hab das zwar schon als Arduino Lösung mit LAN, aber das werd ich mir als nächstes Spielzeug mal bestellen..)

edit: sehe gerade dass ich "IR" in der Überschrift geschrieben haben, das stimmt nicht, es sollte "RF" heißen, es ist also KEIN IR eingebaut!)

[Jonson68]

Hallo Robert;
habe die RF-Bridge V1 auch auf dem Tisch - leider komme ich nicht weiter, damit meine Elro 400 zu schalten.
Bilde dies aktuell immer noch mit FHEM (send) ab -
bist du schon weiter

[Lenardo]

Du hast das Teil geflasht ? Ich verwende tasmota, lerne die Steckdose mit der fb an der Bridge an und schalte diese dann mit Loxone.
welche Software hast du geflasht?

[Riesenschnabel]

In der aktuellen c't ist auch ein zweiseitiger Bericht über dieses Gerät.
Evtl. helfen Dir die Infos aus dem Artikel weiter.

[Jonson68]

habe jetzt folgende Firmware espurna-1.12.6-itead-sonoff-rfbridge.bin drauf
jedoch wollen meine Elro AB440 nicht?
welche Codes werden akzeptiert

hier das Log:

[863096] [RFBRIDGE] Action 0xA4
[863099] [RFBRIDGE] Sending ACK
[863103] [RFBRIDGE] Forward message '28A0015403E840155F'
[863104] [RFBRIDGE] Trying to match code 40155F
[863105] [RFBRIDGE] Match ON code for relay 0
[863107] [RFBRIDGE] Match OFF code for relay 0
[863109] [RELAY] #1 scheduled ON in 0 ms
[863110] [RELAY] #2 scheduled ON in 0 ms
[863111] [RELAY] #3 scheduled ON in 0 ms
[863112] [RELAY] #4 scheduled ON in 0 ms
[863113] [RELAY] #5 scheduled ON in 0 ms
[863114] [RELAY] #6 scheduled ON in 0 ms
[863115] [RELAY] #7 scheduled ON in 0 ms
[863117] [RELAY] #0 scheduled ON in 0 ms
[863128] [RELAY] #0 set to ON
[863132] [RELAY] #1 set to ON
[863135] [RELAY] #2 set to ON
[863138] [RELAY] #3 set to ON
[864151] [RELAY] Saving mask: 255
[870198] [RFBRIDGE] Action 0xA4
[870201] [RFBRIDGE] Sending ACK
[870205] [RFBRIDGE] Forward message '28B4014A03F2401455'
[870206] [RFBRIDGE] Trying to match code 401455
[880340] [RFBRIDGE] Action 0xA4
[880343] [RFBRIDGE] Sending ACK
[880347] [RFBRIDGE] Forward message '28BE014A03E840155F'
[880348] [RFBRIDGE] Trying to match code 40155F
[880350] [RFBRIDGE] Match ON code for relay 0
[880351] [RFBRIDGE] Match OFF code for relay 0
[880353] [RELAY] #1 scheduled OFF in 0 ms
[880354] [RELAY] #2 scheduled OFF in 0 ms
[880355] [RELAY] #3 scheduled OFF in 0 ms
[880356] [RELAY] #4 scheduled OFF in 0 ms
[880357] [RELAY] #5 scheduled OFF in 0 ms
[880359] [RELAY] #6 scheduled OFF in 0 ms
[880360] [RELAY] #7 scheduled OFF in 0 ms
[880361] [RELAY] #0 scheduled OFF in 0 ms
[880372] [RELAY] #0 set to OFF
[880376] [RELAY] #1 set to OFF
[880379] [RELAY] #2 set to OFF
[880382] [RELAY] #3 set to OFF
[881395] [RELAY] Saving mask: 0
[883728] [RFBRIDGE] Action 0xA4
[883731] [RFBRIDGE] Sending ACK
[883734] [RFBRIDGE] Forward message '28B4014A03E840155F'
[883736] [RFBRIDGE] Trying to match code 40155F
[883737] [RFBRIDGE] Match ON code for relay 0
[883739] [RFBRIDGE] Match OFF code for relay 0
[883740] [RELAY] #1 scheduled ON in 0 ms
[883742] [RELAY] #2 scheduled ON in 0 ms
[883743] [RELAY] #3 scheduled ON in 0 ms
[883744] [RELAY] #4 scheduled ON in 0 ms
[883745] [RELAY] #5 scheduled ON in 0 ms
[883746] [RELAY] #6 scheduled ON in 0 ms
[883747] [RELAY] #7 scheduled ON in 0 ms
[883748] [RELAY] #0 scheduled ON in 0 ms
[883760] [RELAY] #0 set to ON
[883764] [RELAY] #1 set to ON
[883767] [RELAY] #2 set to ON
[883770] [RELAY] #3 set to ON
[884783] [RELAY] Saving mask: 255
[893165] [RFBRIDGE] Action 0xA4
[893168] [RFBRIDGE] Sending ACK
[893172] [RFBRIDGE] Forward message '28BE014A03E840155F'
[893173] [RFBRIDGE] Trying to match code 40155F
[893175] [RFBRIDGE] Match ON code for relay 0
[893176] [RFBRIDGE] Match OFF code for relay 0
[893178] [RELAY] #1 scheduled OFF in 0 ms
[893179] [RELAY] #2 scheduled OFF in 0 ms
[893180] [RELAY] #3 scheduled OFF in 0 ms
[893181] [RELAY] #4 scheduled OFF in 0 ms
[893182] [RELAY] #5 scheduled OFF in 0 ms
[893184] [RELAY] #6 scheduled OFF in 0 ms
[893185] [RELAY] #7 scheduled OFF in 0 ms
[893186] [RELAY] #0 scheduled OFF in 0 ms
[893198] [RELAY] #0 set to OFF
[893203] [RELAY] #1 set to OFF
[893206] [RELAY] #2 set to OFF
[893209] [RELAY] #3 set to OFF
[894222] [RELAY] Saving mask: 0
[900304] [MAIN] Uptime: 900 seconds


habe also diesen Code 40155F verwendet - leider ist dieser bei On und OFF der selbe - jedoch wird nichts gschalten

Wie habt ihr dies gelöst, bzw. dann in Loxone integriert?

[Lenardo]

Ich hab es mit tasmota laufen, mit espurna hatte ich auch nicht alle Steckdosen schalten können. Mit tasmota gehen bei mir alle Steckdosen und auch alle 433 MHz bwm einwandfrei