Send value via e-mail

[Aleq]

Hi,
is it possible not only to send static text as notification via Mailer, but also to send the actual value? I have set up an alert for temperature in the house dropping too low - temperature inputs going into "Min Max" (to find the minimum temperature), then "Less" comparison and into mailer. But I haven't figured out how to write any valu in the mail body.

Thanks,
Aleq

[romildo]

Hi,
<v> (<v.1>, <v.2>, <v.3>) will show the value.
Example:
temperature is 10.1°
notification: minimum temperature <v.1> °
Result: minimum temperature 10.1°

[Gast]

Hi,
<v> (<v.1>, <v.2>, <v.3>) will show the value.
Example:
temperature is 10.1°
notification: minimum temperature <v.1> °
Result: minimum temperature 10.1°

By the way, do you know where to find documentation for these template variables?

[romildo]

If you select the property field, it shows a description below..

[Gast]

If you select the property field, it shows a description below..

Yes, I have seen that but I assume there are other variables which are not documented there..

[Aleq]

Exactly my thoughts

[romildo]

Maybe, there are other variables, but I don't now.
This is the only dokumentation I found.

[Aleq]

Hi romildo,
I see. So it's not that a digital pulse activates the Mailer and I'd be able to fetch some additional data (as there are no other inputs). I can use always only one value. Based on my requirements (like to notify only once, when temperature drops below 18 deg.) I have to add some other controls in between to make sure the analog value gets changed only once, when the temperature drops. Am I correct? Or is there any way how to pass more than one value into the e-mail, for instance "Today, it is 10 degrees Celsius and the wind is blowing at 10km/h"?

Thanks,
Aleq

[romildo]

You can take a status.

[romildo]

You're welcome

[tom37]

Hi, I have the same question! What do you exactly mean by "You can take a status"?

[romildo]

@tom37
Hi,
I mean the status object.
See an example in German Forum

https://www.loxforum.com/forum/german/software-konfiguration-programm-und-visualisierung/53849-text-to-speech?p=53859#post53859

https://www.loxforum.com/filedata/fetch?id=53860&d=1472298519